| Murf, The door and fender did arrive in record time. Surprise! Yes it was a pleasure doing business with you. The communications between us was great. You understood my needs and was willing to commit to every possible way to provide the parts that I needed. You conducted the transactions with a business sense but also in a friendly atmosphere. And you were always more than fair and honest in your representation of the parts available. Again I thank you and I will be glad to recommend you to my friends and all. Regards, Joe H. -Tacoma, Wa. (SOLD; 1974 DUSTER- FENDER, DOOR AND SUSPENSION PART) CHECK OUT PICS AND STORY BEHIND THIS SWEET DUSTER |
| Murf, The car is in my driveway, it has really been a pleasure doing business with you, and I hope to do more. If you ever come across any 68 or 69 Corvairs let me know. Thank You, Dave- New Mexico (SOLD: 1969 CORVAIR CONVERTIBLE) CHECK OUT PICS OF THIS CORVAIR IN PROGRESS |
| Hi Murf, Just to let you know, I received the top and bottom trim pieces for the REAR WINDOW, in good condition today. The box was dented but the trim wasn't. I assume the rest of the trim is in the other package ( I received two Click and Ship notifications right after I sent the Payment) and the coil springs will ship later ?? Thanks, Jesse N. (Ca) |
| Hi again Murf, I received 2 more packages today. The rest of the trim and the springs. All arrived O. K. I was a little confused yesterday because I only had been notified of 2 packages by Click and Ship. I didn't know about the springs going direct via the Post Office. Thanks A lot. GOOD Packing. Nice doing business with you. Hope to do more in the future. Jesse N. (Ca) (SOLD: 1966 CORVAIR- CHROME TRIM AND SUSPENSION PARTS) |
| I got the decklid today. It is exactly as promised, and actually the rust is not as bad as I thought it might be. I certainly AM happy with your product and service. Thanks again for everything!! Janet York Motorsports (sold; 1968 Pontiac Bonneville convertible trunk) |
| WE THOUGHT WE WOULD POST SOME OF THE COMMENTS FROM OUR CUSTOMERS. YOU CAN ALSO SEE OUR REPUTATION BY READING OUR FEEDBACKS ON EBAY. WE TRY TO WORK WITH AND PLEASE ALL OF OUR CUSTOMERS. PLEASE EMAIL US YOUR COMMENTS AND WE WILL POST THEM. BE ASSURED WE WILL NOT INCLUDE PERSONAL INFORMATION |
Murf, you certainly can post pictures of the speedster. The speedster was built using a 1923 Model T frame, engine, transmission and rear end. The body is a M & M reproduction Fautless Raceabout. These type of racers were build in the 20's and 30's and were raced at county fairs, which took the place of racing horses. This one is fairly stock, high compression head, high lift cam and bored 40 over. I had it up to about 75 mph and got scared and backed off. The big problem is with the brakes. There is only a drum and band in the transmission which when applied will eventually stop only the rear wheels, so stopping needs much improvement. I purchased your Metropolitan brakes because with a little work they can be fitted to give braking to both the front and rear wheels . Thanks again, Charlie (SOLD 1960 NASH METROPOLITAN BRAKES) CHECK OUT PICS OF THIS SPEEDSTER |
| Hello Murf, I got the wiper arms today ,they're in good shape I can clean them up pretty good , I want to thank you and its been good doing business with you and also just shoot me an email if you find a set of bezels before I do. take care .......Sonny in Tx. (SOLD LUV TRUCK PARTS) |
| Murf, I Got THEM!!! and they are better looking then you had told me! Can't thank you enough! I'll be sending you some pictures soon, but for now I've got some seat risers to install. Thanks a million, Jim Roswell, Ga (SOLD) 1971 FORD MUSTANG SEAT RISERS FLOOR SECTIONS |
| Dear Murf, Hey, just a note to say the tail light parts arrived and are just what I needed. You were right! I was very happy to add to your ebay rating for these. Thanks again, Dominic in Ct. (SOLD) '51 CHEVY BELAIR TAIL LIGHT PARTS |
| CUSTOMER COMMENTS |
| Hello Murf, I got the 66 F-100 grill, just wanted to tell you how much I appreciate it. It is just as described, and u know how hard they are to find. THANKS A BUNCH. Keep up the good work. Sincerely,Mike P. in Waldo, Ark |
| Hi Murf,I got the parts today and wanted to thank you. They were perfect and was exactly what I needed. Thanks,Shawn in Culloden, WV |
| Hey Murf, I received the side seat pocket and back tail light bulb holder for the Volvo 740 about a week ago. Everything works great with bulb holder. I noticed that the side seat pocket part has a hair line crack in the same place where mine broke years back. Only if Volvo would have added more plastic in that area when molding it. Anyways..I'm very happy with the two pieces I bought from you. I look forward in doing business with you again very soon. Have a good one and enjoy your weekend.. Cheers,Jeff in Quincy, FL |
| Hey Murf, Just wanted to let you know that the fender sections arrived yesterday in good shape..And I wanted to say thanks again, it was great dealing with you..I've shown your website to all my club members..As soon as I get started on the frontend of my car, I'll get some pics off to you.... Bob, in NJ we sold Bob the front fender & headlight sections off a 1958 Lincoln for a custom job he's working on. we can't wait to see it!! |
| Hi Murf Just letting you know that the Saab parts arrived today Beautifully packaged, all parts safe and sound Thank you very much Best Regards Malcolm, Scotland we shipped Malcom a bunch of parts for his 1974 Saab project |
| Here’s the 68 Chevelle I was working on. Thanks for the parts! Steve W. Boise, ID 68 CHEVELLE |
| Hi once again Murf, I just wanted to say thank you for a pleasant trading experience and to let you know that I am pleased with the truck hood you sold me. I re-visited your web site and DID see the truck you told me about. Man, you are blessed to be alive much less walking around. Good luck to you in your business and life. I wouldn't hesitate to recommend you to friends nor to trade with you again in the future should I need another part. Bruce in Somerset, KY |
Hi.. Murf.. Thanks for the moldings and bumper piece..perfect.. The olds gona be fine.. You have one,and i have one to.. I send a pic on it.. Best Regards: Mikael, in Sweden CHECK OUT MIKAEL'S OLDS |
| Hi MURF, Sorry it has taken most of the week to write this. I just wanted to say thank you for all of your help on the power brake bracket. It arrived last Saturday and after a few minutes to give it a Sherwin-Williams rebuild it was ready to go. The bracket along with the new power brake booster and master cly. are now installed. I have not driven the car as while it is on the jack stands I decided to freshen up the underside. Hopefully by Monday I will be done. Again I want to thank you. Not many people are willing to mess with these small parts nor do they give the level of service that looks to be the norm at your business. I will keep you in mind for my future needs and hope that we can do business again soon. My next project will be to add power steering and soon A/C (under dash but with factory engine mounts). Have a safe and pleasant Memorial Day weekend. Wayne, Mechanicsville, VA |
| Hi Murf Yes I got back with no problem. I stopped at a Best Western Sat night because they had parking for trucks with trailers. Nice motel. Yes my wife said you had already refunded the $25. It was good to know that there are still people out there that are as honest as you are, and I know I can trust you in any dealing we have together. Thanks again for all of your help I have cleaned the car up and taken the wheels off. got the old tires taken off and have cleaned and sanded the rims. Today I painted the rims to help make the tires hold air. I will put used tires on the car so I can move it around. I will sell the rims later on since they are 13" rims and I need a 14 " rim since the convertible has 14 inch rims. Do you have a 14" Corvair rim? Next i am going to take the idler arm off and weld a straight rod where the bent piece was so that I can move the car around easier. Right now it is still on my trailer as you can see. I got the rims cleaned up pretty good Thanks again Ken in Cary, NC glad to hear it Ken and thanks for responding. would you mind if i posted this comment on my website? i tell all my customers that "i don't want to sell them a part, i want to make a customer" and i believe i've made one in you. thanks again for your business, Murf Hi Murf Yes, you can post any of my comments to you on your website. It was good to know that in this day and age, that there are still some people out there who still value their word and a hand shake as something that you can take to the bank. If a man will not stand by his word, then he is nothing to me. You are not out to cheat any one. I certainly will keep you in mind as the first one to contact should I or one of my friends need something you have. Hope that we can meet again sometime. Did you get my picture I sent you? Please contact me if you get any thing pertaining to my Corvair. Thanks again and God bless you. Ken in Cary, NC |
| we sold this car to Steve in Nashville look at the great job he did with it!! 1969 BUICK "DREAM RESTORED" "The 1969 Buick Lesabre was my first car at age 16. I always dreamed of restoring it, and in 2011, I did. Take a look! Oh, by the way, everywhere I drive it, I receive a thumbs up!" |
| Got the parts this afternoon. Couldn't be more pleased. I'd like to leave a killer comment for you on e-bay. The parts I needed were cut exactly as we discussed, shipped quickly, and fairly priced! You can quote me on that for sure. I just might pick that carcas apart if I come across something else! I will send some pictures as I progress a little. Didn't get to the floor pans today. Wife hit her garage door. I had to pull all my woodworking tools out and rebuild the whole lower section! Thanks once more! Ray, in Ark |
